Invacare TA4 Owners Manual - Page 90

injury or damage may occur.

Get Invacare TA4 PDF manuals and user guides View all Invacare TA4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

11 ARMS 11 Arms ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. NEVER try to lift or tip the wheelchair by T- arm or half arm, serious injury can occur. 11.1 Installing The T-arm Sockets 1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 63. 2. Position the inner T-arm bracket on the wheelchair frame.  The inner T-arm bracket MUST be positioned on the outside of the wheelchair frame. 3. Install the mounting screws and washers through the inner T-arm bracket and loosely tighten. 4. Tighten the mounting screws and washers that secure the inner Tarm bracket to the wheelchair frame. 5. Position T-arm bracket inserts between inner and outer T-arm brackets. 6. Secure the outer T-arm bracket to the inner T-arm bracket with the socket screws and washers. 7. Repeat STEPS 2-6 for the opposite side of the wheelchair. 8. Install the T-arms into the T-arm sockets. Refer to Removing/ Installing Rear Wheels on page 63. T-Arm Wheelchair Frame T- Arm Socket Locking Lever (Towards the front of the wheelchair) Slot FIGURE 1 Installing The T-arm Sockets Invacare® A-4® Wheelchair 90 Part No 1110545

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
11
ARMS
Invacare® A-4® Wheelchair
90
Part No 1110545
11 Arms
11.1
Installing The T-arm Sockets
1.
Remove the rear wheels. Refer to Removing/Installing Rear Wheels
on
page 63.
2.
Position the inner T-arm bracket on the wheelchair frame.
3.
Install the mounting screws and washers through the inner T-arm
bracket and loosely tighten.
4.
Tighten the mounting screws and washers that secure the inner T-
arm bracket to the wheelchair frame.
5.
Position T-arm bracket inserts between inner and outer T-arm
brackets.
6.
Secure the outer T-arm bracket to the inner T-arm bracket with
the socket screws and washers.
7.
Repeat STEPS 2-6
for the opposite side of the wheelchair.
8.
Install the T-arms into the T-arm sockets. Refer to Removing/
Installing Rear Wheels
on page 63.
FIGURE 1
Installing The T-arm Sockets
±
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
NEVER try to lift or tip the wheelchair by T- arm or half arm, serious injury can occur.
The inner T-arm bracket MUST be positioned on
the outside of the wheelchair frame.
T-Arm
Wheelchair
Frame
T- Arm Socket
Locking Lever (Towards
the front of the
wheelchair)
Slot