Invacare TRSX52FB Owners Manual - Page 37
Raising/Lowering Elevating Legrest Assembly,
View all Invacare TRSX52FB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. Push in the release buttons and reposition the footplate assembly to the desired height. 4. Ensure that the release buttons fully protrude from holes on both sides of the front rigging support. 5. Rotate cam lock lever down to locked position. 6. Repeat this procedure for the other footplate, if necessary. 7. Reinstall the swingaway front rigging assembly. Refer to Installing/Removing Front Riggings on page 35. 5 FRONT RIGGINGS Release Button Adjustment Holes Front Rigging Support Cam Lock Lever Swingaway footrest shown. Footplate Assembly FIGURE 2 Adjusting Footplate Height Raising/Lowering Elevating Legrest Assembly ƽ WARNING Ensure hands and fingers are clear of elevating legrest mechanism before pushing release lever to lower the elevating legrest. Otherwise injury may occur due to pinch points. The wheelchair user's leg MUST be supported by an assistant before attempting to lower legrest. 1. To raise the elevating legrest, the assistant should hold the support tube and raise the elevating legrest until the desired height is obtained. 2. To lower the elevating legrest, perform the following: A. Support user leg with one hand. B. Push release lever downward with other hand. C. Gently, lower user leg down and rest against the legrest. Part No. 1110550 37 FIGURE 3 Release Lever Support Tube Raising/Lowering Elevating Legrest Assembly Invacare® Tracer® SX5 Wheelchair