JBL Authentics 300 Owners Manual English 1 - Page 7

English 4. POWER ON / OFF 4.1 AC-powered mode 4.1.1 Connect power 4.2 Battery mode 4.2.1 Charge the battery • Connect the speaker to power by using the supplied power cord. 4.1.2 Switch on • To switch on, press . 20% 50% 100% • Connect the speaker to power by using the supplied power cord. → Battery charging starts automatically. 4.2.2 Power-saving mode In the battery mode, the speaker automatically powers off after 1 hour of inactivity to save power. Press to switch on. NOTE: - To avoid draining the battery, switch off the speaker if it is not going to be used for a long time. 4.1.3 Auto standby If the speaker is inactive for more than 10 minutes, it will switch to standby mode automatically. 4.1.4 Auto wakeup In standby mode, the speaker will wake up automatically when • you press any button on the speaker; • the speaker is connected to your home network and you control the setup and playback on the speaker through the JBL One app; • the speaker is connected to your home network and you wake up the speaker through an enabled voice assistant; • the speaker is connected to your home network and audio is streamed to the speaker through the supported streaming services that you have enabled in the JBL One app; • an audio cable has been inserted into the speaker and music playback has started from the external device connected through the audio cable. www.jbl.com 7