JBL ON STAGE Owners Manual Multilingual - Page 7

Step 5. If using iPod Classic, connect auxiliary cable from headphone to AUX jack on back of on stage. Step 6. If needed, connect Auxiliary input ( desktop or laptop computer) to AUX connector. Step 7. Press power button on back of on stage. Green LED will light when on stage system is on. Step 8. Adjust Volume using "+" to increase and "-" to decrease. Press both to Mute the on stage. Press either button to unmute. Symptom No Power. Green LED in power button is not on. www.JBL.com Possible problem Solution Wall adaptor is not plugged into on Check connection of wall adaptor. stage correctly. Wall adaptor is not receiving AC power. Place wall adaptor in a known powered outlet. Test outlet with a lamp or other device. Power button is not depressed. Press power button located at the rear of the unit. Green LED will illuminate. iPod volume control does not increase audio volume. iPod volume control only controls Use the on stage volume control buttons for volume control when the volume output to the headphone iPod is docked on the on stage unit. jack. This product is intended to be supplied by a Listed Direct Plug-in Power Unit marked Class 2 and Output rated 18 Vdc minimum 0.8A. 7