JBL VTX B18 Rigging Manual - Page 21
Rotating the Dolly Tabs For Use With the ACC Dolly, TOOLS REQUIRED
View all JBL VTX B18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
VTX B18 | Rigging Manual 8.1 ROTATING THE DOLLY TABS FOR USE WITH THE ACC DOLLY Two retractable dolly tabs at the front of the B18 are used to secure the ACC dolly board to the subwoofer. The tabs ship from the factory facing the inside of the B18, which is ideal for transporting B18s on a vertical transport cart, when the tabs are not needed. However, to attach a front face dolly board to a B18, the tabs must be rotated. STEPS: •1 Remove the four M6 HEX screws holding the grill onto the B18 •2 Carefully disconnect the MolexTM connector that connects the two front NL4 connectors to the B18 1 2 TOOLS REQUIRED: A 4 mm HEX key is required to remove the four M6 screws holding the grill onto the B18. A Phillips #2 screwdriver is required to remove the four Phillips screws holding the dolly tab. 21