JET Tools L-100-250-10 User Manual - Page 12

Inspection and Maintenance, Normal Service, Heavy Service, and Severe

Get JET Tools L-100-250-10 PDF manuals and user guides View all JET Tools L-100-250-10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Inspection and Maintenance Read and follow ANSI Inspection and Maintenance Instructions. Know the meaning of Frequent Inspection, Periodic Inspection, Normal Service, Heavy Service, and Severe Service. It is the customer's responsibility to understand and follow all ANSI and JET inspection and maintenance instructions. All repairs and adjustments are to be performed by trained and experienced personnel using procedures that are approved for the hoist system being serviced. Failure to comply may cause serious injury. All safety related deficiencies discovered in the inspection are to be corrected before the hoist is to be placed back into service. Failure to comply may cause serious injury. Check for internal damage whenever external damage has occurred. Failure to comply may cause serious injury. 1. Clean hoist after each use and oil lightly. 2. Do not drop or drag the hoist. 3. Store the hoist in a clean and dry environment. 4. Chain oiling is not mandatory but will increase the life of the chain. 5. Leave all repairs and adjustments of internal parts to qualified repair personnel. 6. Inspect the load chain and the lower hook after lifting a maximum weight load. 7. This hoist uses special alloy hoisting chain and does not interchange with any other manufacturer. All replacement chain must be purchased from your JET distributor or from JET directly by calling 800-274-6848. 8. Check and inspect the brake system frequently. 9. Annually, the hoist should be disassembled, inspected, and cleaned by trained and experienced personnel only. Contact a Walter Meier authorized service center by calling your dealer or visiting our web site at waltermeier.com. 10. After servicing, test the hoist with no load, then test the hoist with a load. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
12
Inspection and Maintenance
Read
and
follow
ANSI
Inspection
and
Maintenance Instructions. Know the meaning of
Frequent
Inspection,
Periodic
Inspection,
Normal Service, Heavy Service, and Severe
Service. It is the customer’s responsibility to
understand and follow all ANSI and JET
inspection and maintenance instructions.
All repairs and adjustments
are
to
be
performed
by
trained
and
experienced personnel using procedures
that are approved for the hoist system being
serviced. Failure to comply may cause
serious injury.
All safety related deficiencies
discovered in the inspection are to be
corrected before the hoist is to be placed
back into service. Failure to comply may
cause serious injury.
Check for internal damage
whenever external damage has occurred.
Failure to comply may cause serious injury.
1.
Clean hoist after each use and oil lightly.
2.
Do not drop or drag the hoist.
3. Store the hoist in a clean and dry
environment.
4. Chain oiling is not mandatory but will
increase the life of the chain.
5.
Leave all repairs and adjustments of internal
parts to qualified repair personnel.
6. Inspect the load chain and the lower hook
after lifting a maximum weight load.
7. This hoist uses special alloy hoisting chain
and does not interchange with any other
manufacturer. All replacement chain must
be purchased from your JET distributor or
from JET directly by calling 800-274-6848.
8. Check and inspect the brake
system
frequently.
9.
Annually, the hoist should be disassembled,
inspected, and cleaned by trained and
experienced personnel only. Contact a
Walter Meier authorized service center by
calling your dealer or visiting our web site at
waltermeier.com.
10. After servicing, test the hoist with no load,
then test the hoist with a load.