JET Tools L-100-250-10 User Manual - Page 4

Warnings, Society of Mechanical Engineers, 345 East 47

Get JET Tools L-100-250-10 PDF manuals and user guides View all JET Tools L-100-250-10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

W arning 1. Read and understand the entire owners manual before attempting assembly or operation. 2. Read and understand the warnings posted on the tool and in this manual. Failure to comply with all of these warnings may cause serious injury and/or damage to property. 3. Replace the warning labels if they become obscured or are missing. 4. Keep visitors a safe distance from the work area. Keep children away. 5. Give your work undivided attention. Looking around, carrying on a conversation and "horse-play" are careless acts that can result in serious injury. 6. This chain hoist is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a chain hoist, do not use until proper training and knowledge have been obtained. 7. Do not use this chain hoist for other than its intended use. If used for other purposes, JET disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use. 8. Do not use to lift people or loads over people. 9. Do not exceed the rated capacity of the chain hoist. 10. Do not use more than hand power to pull the hand chain. 11. Do not use the load chain as a sling; this may cause damage to the chain. 12. Always inspect the chain hoist for damage prior to use. If the chain hoist is damaged, do not use until it has been repaired or replaced. 13. Do not use more than one chain hoist to lift or move a load. If this is unavoidable, each chain hoist must have the same capacity as the load to be moved. 14. Never allow the load chain to "set" over sharp edges. All lifts must be made with straight chain that is free of obstacles. 15. If the hand chain is difficult to operate, then the load exceeds the capacity of the chain hoist. Select a chain hoist of larger capacity. 16. Do not use a chain hoist unless load is centered between top and bottom hooks. 17. Always take time to study the job to be performed and choose the safest method. Do not place yourself or other people in an unsafe position. 18. Leave all internal maintenance to a qualified Walter Meier repair station. 19. Replace the chain with factory replacement chain only. Do not use any other type of chain. 20. Never use the chain hoist if either hook is stretched, deformed, or has a broken or missing safety latch. Always replace the safety latch and/or the hook before placing the chain hoist back into service. 21. Understand and follow all procedures as set forth in American National Standards titled "Performance Standard for Hand Chain Manually Operated Chain Hoists." ANSI/ASME HST-2; and "Overhead Hoists (Underhung)," ANSI/ASME B30.16. These standards are available through the American Society of Mechanical Engineers, 345 East 47th St., NY, NY 10017. (www.asme.org) Familiarize yourself with the following safety notices used in this manual: This means that if precautions are not heeded, it may result in minor injury and/or possible tool damage. even death. This means that if precautions are not heeded, it may result in serious injury or possibly 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
4
Warning
1.
Read and understand the entire owners manual before attempting assembly or operation.
2.
Read and understand the warnings posted on the tool and in this manual. Failure to comply with all of
these warnings may cause serious injury and/or damage to property.
3.
Replace the warning labels if they become obscured or are missing.
4.
Keep visitors a safe distance from the work area.
Keep children away.
5.
Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are
careless acts that can result in serious injury.
6.
This chain hoist is designed and intended for use by properly trained and experienced personnel only.
If you are not familiar with the proper and safe operation of a chain hoist, do not use until proper
training and knowledge have been obtained.
7.
Do not use this chain hoist for other than its intended use. If used for other purposes, JET disclaims
any real or implied warranty and holds itself harmless from any injury that may result from that use.
8.
Do not use to lift people or loads over people.
9.
Do not exceed the rated capacity of the chain hoist.
10. Do not use more than hand power to pull the hand chain.
11. Do not use the load chain as a sling; this may cause damage to the chain.
12. Always inspect the chain hoist for damage prior to use. If the chain hoist is damaged, do not use until
it has been repaired or replaced.
13. Do not use more than one chain hoist to lift or move a load. If this is unavoidable, each chain hoist
must have the same capacity as the load to be moved.
14. Never allow the load chain to “set” over sharp edges. All lifts must be made with straight chain that is
free of obstacles.
15. If the hand chain is difficult to operate, then the load exceeds the capacity of the chain hoist. Select a
chain hoist of larger capacity.
16. Do not use a chain hoist unless load is centered between top and bottom hooks.
17. Always take time to study the job to be performed and choose the safest method. Do not place
yourself or other people in an unsafe position.
18. Leave all internal maintenance to a qualified Walter Meier repair station.
19. Replace the chain with factory replacement chain only. Do not use any other type of chain.
20. Never use the chain hoist if either hook is stretched, deformed, or has a broken or missing safety
latch. Always replace the safety latch and/or the hook before placing the chain hoist back into service.
21. Understand and follow all procedures as set forth in American National Standards titled
“Performance
Standard for Hand Chain Manually Operated Chain Hoists.”
ANSI/ASME HST-2; and
“Overhead
Hoists (Underhung),”
ANSI/ASME B30.16. These standards are available through the American
Society of Mechanical Engineers, 345 East 47
th
St., NY, NY 10017. (www.asme.org)
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible tool damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.