JVC BR-DV600E 45 pg user manual for BR-DV600U/E VTR (1130KB) - Page 12

4 MENU SWITCHES 4-2 Menu switch details q: Factory setting (00): The number in the bracket shows the set value on the counter display. 397 FAN STOP SHUTDOWN Details: Sets whether or not VCR operation continues if the fan motor stops. Setting: qENABLE (00): The power turns off about 1 minute after the fan motor stops. DISABLE (01): The VCR continues operation even after the fan motor stops. When the fan motor stops, press the [OPERATE] button as soon as possible to turn the VCR's power off. If not, a malfunction may occur due to overheating. 414 TCG SELECT Details: Selects the time code generator mode. Setting: qPRESET (00): Engages the Preset mode. REGEN (01): Engages the Regen mode. 415 TCG MODE Details: Selects the time code generator Run mode. Setting: FREE RUN (00): Engages the Free Run mode. qREC RUN (01): Engages the Rec Run mode. 416 NON DROP/DROP (U MODEL) Details: Selects the time code generator Drop Frame mode. Setting: qDROP (00): Engages the Drop Frame mode. NON DROP (01): Engages the Non-Drop Frame mode. 500 ON SCREEN Details: Selects whether or not the on-screen display is shown on the monitor. Setting: OFF (00): The display is not shown. qON (01): The display is shown. 501 CHARACTER H.POSITION Details: Moves the display position of the tape counter on screen, etc. horizontally. Setting: q0 (00) The display position can be moved in : 9 steps from 0 to 8. The factory setting is 8 (08) "0" (the display position at the far right). * The tape remaining time indication position cannot be changed. 502 CHARACTER V.POSITION Details: Moves the display position of the tape counter on screen, etc. vertically. Setting: 0 (00) The display position can be moved in q 1 (01) 12 steps from 0 to 11. When the No. 504 : menu switch is 11(11) set to "MODE + TIME>, setting to "0" is not possible. * The tape remaining time indication position on screen can be changed up and down with this switch. 504 INFORMATION SELECT Details: Selects which information is displayed on the on-screen display. Setting: TIME (00): Time data is displayed qMODE+TIME (01): Time data and tape running mode are displayed. 505 REMAIN ENABLE Details: Selects whether or not the tape remaining time is shown on the on-screen display. Setting: qOFF (00): Remaining time is not shown. ON (01): Remaining time is shown. 514 TIME DISPLAY SELECT Details: Selects the type of time data displayed. Setting: DATE (00): Shows the date. CLOCK (01): Shows the time. DATE+CLOCK (02): Shows the date and time. qTC (03): Shows the time code data. 516 DISPLAY SELECT Details: Selects the type of data displayed on the tape counter in the LCD display. Setting: qTC (00): Shows the time code data. CLOCK (01): Shows the date and time. You can switch between date and time with the [COUNTER] switch. 5 PREPARATION Preparing this unit for recording or playback. CH-1/3 REC LEVEL VIDEO CASSETTE RECORDER BR-DV600U OPERATE ON/OFF EJECT CH-2/4 MENU ADVANCE PRESET SHIFT SHIFT HOLD SHIFT A. DUB PHONES SELECT SET MONITOR OUTPUT COUNTER L CH-1/2 CTL MIX MIX TC R CH-3/4 UB AUDIO CH 1/3 40 30 20 10 CH 2/4 OVER AUTO OFF DEW 0 dB OVER SERVO RF 32k 48k SLAVE PB NDF HOLD AUD LOCK SP MENU H M S F REC PLAY PAUSE REMOTE REW STOP FF LOCAL MIC [OPERATE] button [EJECT] button [AUDIO MONITOR] switch Turn the power ON. Press the [OPERATE] switch. The counter display lights up. Turn the power OFF Press the [OPERATE] switch. "oPF-oFF" is shown in the counter display. Loading/unloading a cassette Insert the cassette into the cassette loading slot with the window facing up. Push the cassette in slowly until the loading mechanism starts automatic loading. [ The VCR enters the Stop mode and the cassette indicator ( ) lights. Press the [EJECT] button to eject the cassette. [ The cassette tape is ejected. Audio monitor selection Use the [AUDIO MONITOR] switch to select the audio channel to monitor (via the [AUDIO MONITOR OUT] connectors). 20 21