JVC DF450 Instructions - Page 22
VIDEO PLAYBACK, Normal Playback, Still Playback, Shuttle Search, Blank Search - gr gr
View all JVC DF450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 EN VIDEO PLAYBACK Normal Playback MENU Power Switch VIDEO/ MEMORY* 4/9/ VOL. +/- Lock Button 3 8/ 5 SET Speaker 1 Load a cassette. (੬ pg. 17) 2 Set the VIDEO/MEMORY Switch to "VIDEO".* 3 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. 4 To start playback, press 4/9. 5 To stop playback, press 8. ● During Stop mode, press 3 to rewind, or 5 to fast-forward the tape. * GR-DF470/450 only To control the speaker volume Slide the Power Zoom Lever (VOL. +/-) towards "+" to turn up the volume, or towards "-" to turn down the volume. NOTES: ● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV. (੬ pg. 23) ● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to "OFF", then to "PLAY". ● When a cable is connected to the AV connector, the sound is not heard from the speaker. Still Playback Pauses during video playback. 1) Press 4/9 during playback. 2) To resume normal playback, press 4/9 again. ● If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically engaged. Shuttle Search Allows high-speed search in either direction during video playback. 1) During playback, press 5 for forward search, or 3 for reverse search. 2) To resume normal playback, press 4/9. ● During playback, press and hold 5 or 3. The search continues as long as you hold the button. Once you release the button, normal playback resumes. ● A slight mosaic effect appears on the display during Shuttle Search. This is not a malfunction. ATTENTION: During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen. Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption. (੬ pg. 21) 1 Load a cassette. (੬ pg. 17) 2 Set the VIDEO/MEMORY Switch to "VIDEO".* 3 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. 4 Press MENU. The Menu Screen appears. 5 Press SET to select "t". The VIDEO Menu appears. 6 Press or to select "BLANK SRCH", and press SET. The Sub Menu appears. 7 Press or to select "EXECUTE", and press SET. ● The "BLANK SEARCH" indication appears and the camcorder automatically starts reverse or forward search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion. ● To cancel Blank Search midway, press 8. * GR-DF470/450 only