JVC DLA-NZ7 Operation Manual - Page 51
Selecting the Base Correction Value Initial Value for Adjustment
![]() |
View all JVC DLA-NZ7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Selecting the Base Correction Value (Initial Value) for Adjustment 0 Selecting one of the "Custom 1" to "Custom 3" settings in "Gamma" allows you to select the "Correction Value". 0 Select the base "Correction Value" for adjustment using the H I keys. 0 The selectable correction values vary according to "Picture Mode". (Refer to the table below.) List of selectable "Correction Value" according to "Picture Mode" Picture Mode Correction Value Film Film 1 x y 5 6 Film 2 Import Cinema 1.8 Natural User 1 to User 3 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Cinema 1 Cinema 2 Import Picture Mode Correction Value HDR10 HDR(PQ) Import HLG HDR(HLG) Import User 4 to User 6 HDR(PQ) HDR(HLG) Import * Correction value cannot be configured when "Picture Mode" is configured to "Frame Adapt HDR"/"HDR10+". When "Correction Value" is set to "Import" 0 By selecting "Import" for "Correction Value", the gamma data created externally can be selected as the base setting value for adjustment. 0 The factory setting for "Import" is "2.2". 0 You can use the calibration software to customize the gamma data adjustment, and import the created gamma data. Please check with your authorized dealer for details. Adjust/Set 51
![](/manual_guide/products/jvc-dlanz9-operation-manual-9110011/51.png)