JVC DLA-NZ7 Operation Manual - Page 86
D video image looks unnatural, Troubleshooting, Colors are unnatural, Video image is fuzzy
![]() |
View all JVC DLA-NZ7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
3D video image looks unnatural Check Are there overlapping video images? Action Refer to If there are overlapping video images partially, this is due P. 31 to the crosstalk phenomenon. In this case, adjust "Crosstalk Cancel" accordingly. If there are overlapping video images partially, this is due P. 57 to the crosstalk phenomenon. It may be improved by changing "LD Power" to "High". Video image looks unnatural Colors are unnatural Check Action Refer to Is the color space of the input signal correctly set? The color may turn out unnatural when the input signal is P. 66 different from that in the projector setting. Set the "Color Space" for "Input Signal" correctly. Is the image correctly adjusted? Adjust "Color" and "Tint" accordingly. Check Picture Settings. P. 58 Is the AV device or PC properly connected? Connect the AV device or PC properly. P. 23 * The video image may appear slightly reddish immediately after starting up. This is not a malfunction. Video image is fuzzy Check Action Is the focus correctly adjusted? Adjust the focus. Is the unit placed too near or too far away Set the unit at a correct distance from the screen. from the screen? Refer to P. 28 P. 96 Video image flickers Check Action Refer to Do you see horizontally-extended, overlapping video images? In this case, set "3D Format" to "Auto" P. 31 Are you viewing the video images under This is caused by interference between the 3D glasses with - a fluorescent light? the flickers of the fluorescent light. View with the fluorescent light turned off. Is "Dynamic CTRL" set to "Mode 1" or Set "Dynamic CTRL" to "Off" "Mode 2"? P. 57 Video format changes Check Is the cable in use an HDMI-certified cable? Action Refer to Depending on the quality of the cable in use, the signal from P. 23 the device connected may change to a receivable video format. Make use of an HDMI cable with the Ultra High Speed HDMI Cable certification (supports 48 Gbps). Troubleshooting 86
![](/manual_guide/products/jvc-dlanz9-operation-manual-9110011/86.png)