JVC DRMV100B Instructions - Page 13
Hookup and Settings - dvd vcr
UPC - 046838034152
View all JVC DRMV100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HOOKUP AND SETTINGS Hookup and Settings Depending on your TV and other equipment there are various ways you can connect the a recorder. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary for additional connection informa- tion. Notes: • Make sure the Recorder is connected directly to the TV and tune the TV to the correct video input channel. • Do not connect the Recorder's AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system. • Do not connect the Recorder via another VCR. The DVD image could be distorted by the copy protection system. • The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off the unit after removing the disc. b Antenna OR Rear of Recorder Antenna OR Connecting an Antenna or Cable TV a Antenna: Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANTENNA IN on your Recorder. If your antenna cable is flat connect it to a 300-ohm to 75-ohm antenna adaptor (not supplied) and slip the adaptor over the ANTENNA IN jack. Don't attempt to screw it into to the Recorder. b Cable TV: If your cable connection has no converter or descrambler, unscrew the cable from your TV and attach it to the ANTENNA IN jack on the Recorder. If a converter is required connect a coaxial cable from the wall jack to the IN connector on the converter, and a coaxial cable from the OUT connector on the converter to the ANTENNA IN on your Recorder. This cable hookup permits both TV and Recorder operation. To view or record a CATV channel 1. Tune the TV to the Recorder output channel (CH 3 or 4). 2. Set the Recorder channel selector to the cable output channel. (Example: CH3) 3. Select a channel using the cable converter. Notes: • With this connection, you cannot record one program while viewing another. • If you are using a cable box to tune channels, it is not necessary to do Auto Channel Set. 9