JVC DT-E17L4G Operation manual for DT-E17L4/DT-E21L4G Monitor (32 pages) - Page 27

Specifications General Model name Type Screen size Aspect ratio Horizontal/vertical frequency (computer signal) Compliant video signal format Format Audio output Operating conditions Power requirements Rated current External dimensions (excluding protruding parts) Weight Accessories DT-E21L4 Multi format LCD monitor Type 21 wide format 16:9 DT-E17L4G Type 17 wide format H: 31.469 kHz - 75.000 kHz V: 49.990 Hz - 75.062 Hz * Some signals within this frequency range may not be displayed ("Out of range" is displayed). ☞ "Available signals" on page 29 HD SDI: SD SDI: EMBEDDED AUDIO: BTA S-004C, SMPTE292M ITU-R BT.656: 525/625 SMPTE259M: 525 SMPTE299M, SMPTE272M Internal speaker: 1.0 W + 1.0 W Operating temperature: 5°C - 35°C (41°F - 95°F) Operating humidity: 20% - 80% (non-condensing) (Slightly variable depending on ambient conditions for installation.) AC 120 V, 50 Hz/60 Hz or DC 12 V - 17 V 0.6 A (AC 120 V) 3.5 A (DC 12 V - 17 V) 0.5 A (AC 120 V) 3.0 A (DC 12 V - 17 V) Width: 515 mm (20 3/8˝) 515 mm (20 3/8˝) Width: 430 mm (17˝) 430 mm (17˝) Height: 352.1 mm (13 7/8˝) 347 mm (13 3/4˝) Height: 314.1 mm (12 3/8˝) 309 mm (12 1/4˝) Depth: 181 mm (7 1/4˝) 99.8 mm (4˝) Depth: 181 mm (7 1/4˝) 102 mm (4˝) (with the stand) (without the stand) (with the stand) (without the stand) 7.7 kg (16.9 lbs) (with the stand) 6.2 kg (13.6 lbs) (without the stand) 7.1 kg (15.6 lbs) (with the stand) 5.6 kg (12.3 lbs) (without the stand) AC power cord x 1, Power cord holder x 1, Screw x 2 (for power cord holder) LCD panel Type Effective screen size Number of pixels displayed Number of colors displayed Viewing angle (TYP.) Brightness (TYP.) Contrast ratio (TYP.) 21˝ wide, active matrix TFT Width: 477 mm (20 1/2˝) Height: 268 mm (12 7/8˝) Diagonal: 547 mm (21 9/16˝) 1920 x 1080 16.70 million 170° (Horizontally), 160° (Vertically) 250 cd/m2 1000:1 17˝ wide, active matrix TFT Width: 382 mm (14 3/4˝) Height: 215 mm (8 3/8˝) Diagonal: 438 mm (17 1/4˝) 160° (Horizontally), 60° (Upward), 80° (Downward) 300 cd/m2 600:1 Video Input/output terminals VIDEO HDMI COMPO./RGB (R, G, B, HS, VS or Y, Pb/B-Y, Pr/R-Y) E. AUDIO HD/SD SDI (IN 1) E. AUDIO HD/SD SDI (IN 2) E. AUDIO HD/SD SDI (SWITCHED OUT) AUDIO (IN) Input/output of composite signal: 1 line, BNC connector x 2, 1 V (p-p), 75 Ω * The input (IN) and output (OUT) terminals are bridge-connected (auto termination). HDMI signal input (compatible with HDCP): HDMI connector x 1 Analog Component signal input/Analog RGB signal input: 1 Line, mini D-SUB 15pin x1 Y: 1 V(p-p), 75 Ω(with sync) G, B/PB/B-Y, R/PR/R-Y: 0.7 V (p-p), 75 Ω HS, VS: 0.3 V (p-p) to 5 V (p-p) * For HS and VS, change the Low/High terminals manually. Digital signal input (compatible with EMBEDDED AUDIO signals): auto detection, 2 line, BNC connector x 2 Digital signal output (compatible with EMBEDDED AUDIO signals): 1 line switched out, BNC connector x 1 Analog audio signal input: 2 line, RCA connector x 2, Stereo mini Jack x1, 500 mV (rms), high impedance AUDIO (MONITOR OUT) REMOTE (MAKE/TRIGGER) REMOTE (RS-485) Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms) ☞ "Using the Make/Trigger system" on page 22 ☞ "Using the serial communication" on page 23 REMOTE (RS-232C) Audio External control 27