JVC DT-E17L4GU Operation manual for DT-E17L4/DT-E21L4G Monitor (32 pages) - Page 19

Information Settings for the information display of the monitor. Item Source ID Character Setting Status Display Time Code CRC Error Sub Hour Meter Model Version Hour Meter*2 To do Setting value Select whether the name assigned in "Character Setting" is displayed on the screen (☞ "On Off, On, Auto the Information Display" on page 11). • When "Auto" is selected, the display color synchronizes with the color of the tally lamp while the tally lamp is lit. Assign a name to each video source as you like (10 characters at maximum). You can also enter a name using the RS-232C system. (☞ Page 20) Display/Hide the status of the current input and the setting of MUTING. (☞ "On the Status Auto, Off, On Display" on page 12) Select the type of the TIME CODE display. VITC*1, LTC*1, D-VITC Display/Hide the CRC error when the HD SDI signal is input. (☞ "On the Information Display" Off, On on page 11) Display the hours of use (unit: hour). The usage time can be reset to 0. Display the model name of the monitor. Display the version of the monitor. Display the total hours of use (unit: hour). This item is used for maintenance of the monitor. You cannot reset this item. *1 Ancillary time code *2 "Hour Meter" and settings specified using the front knob are not reset. Control Lock*3 Setting values: Off, Volume Lock, All Lock Settings for disabling the buttons on the front panel. *3 • The following operations are not available when "Volume Lock" is selected. - Picture adjustment knob • The "All Lock" function disables to control the buttons on the front panel. But following operations are available. - Turning on/off (on standby) the monitor - Displaying the Set-Up Menu by pressing button while holding button and turning "Control Lock" to "Off" - Operating the monitor by an external control If you try other operations, "Control lock on!" appears on the screen. Language Setting values: English, Deutsch, Français, Español, Italiano, Pуccкий Select the displayed language for the menu, etc. IMD Settings for IMD (In-monitor Display). (☞ Page 20) Item IMD Display IMD Protocol Address IMD Size Text Color Tally 1 Color Tally 2 Color Background Color reset To do Display setting On: Displayed, Off: Not displayed Serial communication protocol setting Off: Supports JVC protocol, TSL V4.0: Supports TSL UMD Protocol V4.0 Address setting 000 to 126: Set a particular address Text size setting Small: Small size, Middle: Standard size, Large: Large size Text color setting Command: Same color as that set for communication (Command) Red, Green, Amber, Blue, Cyan, Magenta, White: Color settings Tally 1 color setting Command: Same color as that set for communication (Command) Red, Green, Amber, Blue, Cyan, Magenta, White: Color settings Tally 2 color setting Command: Same color as that set for communication (Command) Red, Green, Amber, Blue, Cyan, Magenta, White: Color settings Display background color setting Black: Set the background of the IMD display to black Translucent: The picture on the monitor shows through the IMD display. Transparent: Set the background of the IMD display transparent. Return the "IMD" settings to their default values Setting value On, Off Off, TSL V4.0 000 to 126 Small, Middle, Large Command, Red, Green, Amber, Blue, Cyan, Magenta, White Command, Red, Green, Amber, Blue, Cyan, Magenta, White Command, Red, Green, Amber, Blue, Cyan, Magenta, White Black, Translucent, Transparent all reset Restores all the settings and adjustments of the monitor to the default. 19