JVC DT-N24H Instruction Manual - Page 11

Main Menu Picture Function Setting for the picture quality. Item Exit Contrast Brightness Saturation Sharpness Hue Backlight To do Return Main Menu Adjusts the contrast of the display. Adjusts the brightness of the display. Adjusts the saturation of the display. Adjusts the sharpness of the display. Adjusts the hue of the display. Adjusts the backlight of the display. Setting value 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 Color Temperature Adjusts the R/G/B Gain and Bias, and Gamma Preset Item Exit Gamma Color Temp Red Gain Green Gain Blue Gain Red Bias Green Bias Blue Bias To do Return Main Menu Select the Gamma correction value. Select the color temperature Mode. Adjusts the Red Gain Adjusts the Green Gain Adjusts the Blue Gain Adjusts the Red Bias Adjusts the Green Bias Adjusts the Blue Bias Setting value 2.2 (equivalent to Υ 2.2) 2.4 (equivalent to Υ 2.4) 2.6 (equivalent to Υ 2.6) 5600Ka6500Ka9300KaUser 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 0 to 255 Only "Color Temp" is set to "User", the Red/Blue/Green Gain or Red/Blue/Green Bias can be adjusted Function Key Set short-cut functions for F1-F4 Item To do Setting value Exit Return Main Menu F1 F2 Audio Bar, False Color, AFD, H/V Delay, R/G/B/Mono, F3 F4 Assign functions to the function keys F1 - F5 on the front key board Marker , Color Bar, UMD, Audio Alarm, Focus Assist , Aspect Ratio , Scan Mode, Zoom Mode, Mute, Freeze Frame, Flip Mode , CVBS, YPbPr ,VGA , Color Temp, Time Code, Zebra. F4 For example: Set F3 to "Flip Mode" under "Function key" submenu. User can press F3 on the front panel to adjust the parameters of "Flip Mode", and the "Flip Mode" will change and follow the sequence: H Flip ¹V Flip¹H/V Flip ¹Off . ABCDEF ABCDEF ABCDEF ABCDEF GPI Setting functions for external control Item Exit GPI Control*1 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin To do Return Main Menu Enable GPI control Assign functions to the GPI terminals Setting value ON, OFF Red Tally, Green Tally, Yellow Tally, Aspect Ratio, Scan Mode, Zoom Mode, Mute, Freeze Frame, Flip Mode, Color Temp, Time code, Zebra,Audio Bar, False Color, AFD, H/V Delay, R/G/B/Mono, Marker , Color Bar, UMD, Audio Alarm, Focus Assist. *1 When "GPI control" is set to "On", the monitor can be operated through external GPI control unit. Example 1: Under "GPI " submenu, set "GPI control" to "On", set "2 Pin" to "Red Tally", when the pin 2 of the extenal GPI control unit is Example 2: Under "GPI " submenu, set "GPI control" to "On", set "6 Pin" to "Scan Mode", when the pin 6 of the extenal GPI control unit is 11 connected with ground, the Scan mode will change and follow the sequence: "Normal" ¹"Overscan"¹"Native" .