JVC DT-X71H DT-X71C/H/F Operation manual - Page 8

Front view DT-X71H ⑴ PHONE: Earphone jack ⑵ POWER: Power on/off Connect with power cable or mount battery, press the "POWER" and the power indicator is turned on and after 10 seconds, the monitor will be switched on and get into normal working status. Press the "POWER" again, the indicator is turned off and monitor is switched off. Remark: Disconnect with power cable or take off the battery if the monitor will not be used for a period of time. ⑶ VIDEO: Press to switch the input signal to Composite video ⑷ HDMI: Press to switch the input signal to HDMI ⑸ HD-SDI1: Press to switch the input signal to the first HD-SDI channel ⑹ HD-SDI2: Press to switch the input signal to the second HD-SDI channel ⑺ MENU: Press to enter Menu ⑻ F1: User definable function key 1 ⑼ F2: User definable function key 2 ⑽ RATIO: 16:9 and 4:3 switch ⑾ ZOOM: Picture Zoom-in Press "ZOOM" to switch ZOOM1: Canon DSLR scale zoom-in, and ZOOM2: pixel to pixel zoom-in. ⑿ DISPLAY: Display current settings Press "Display" to display safety mark, title and the current input signal information ⒀ OK: Select and Apply Under menu system, revolve "OK" to adjust settings and press to apply; and out of menu system, directly revolve "OK" to adjust volume. ⒁ TALLY Light: Red, Green and Yellow 3-color TALLY indicator