JVC EX D1 Instructions - Page 28
Creating realistic sound, 3D PHONIC, Adjusting playback level, DVD LEVEL, Enjoying better pictures,
UPC - 046838017995
View all JVC EX D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Other convenient functions (continued) Adjusting playback level (DVD LEVEL) Creating realistic sound (3D PHONIC) The two speakers produce an effect resembling surround-sound. 1 Press 3D PHONIC during playback. Ex.: TV screen 3D PHONIC • Each time you press the button, the 3D PHONIC will be alternated as follows: ACTION : Suitable for action movies, sport programs or other lively programs. DRAMA : You can relax with a natural atmosphere. THEATER : You can enjoy the sound effect as if you were watching the movie in a theater. 26 OFF : Cancels 3D PHONIC (initial setting). • While 3D PHONIC is activated, "3D PHONIC" appears and the 3D PHONIC indicator lights on the display window. NOTE • 3D PHONIC is effective for the speakers and headphones. • When noise is produced or sound is distorted, set 3D PHONIC to "OFF". • You cannot use this functions for some DVD AUDIO discs. • For an MPEG1/MPEG2 disc, 3D Phonic does not work and creates no sound effect even when "ACTION", "DRAMA", "THEATER" is displayed. The audio of a DVD VIDEO may be recorded at a lower level (volume) than for other types of disc. If the difference is not to your liking, adjust the DVD Level. 1 Press DVD LEVEL/ during playback. • Each time you press the button, the level will be alternated among "NORMAL", "MIDDLE" and "HIGH". • Select the level while listening to the sound played. NOTE • DVD Level is effective only for playback of a DVD VIDEO or DVD VR. • Even if the DVD Level is changed, the output level from the digital audio output terminal will not be changed. Enjoying better pictures (SCAN MODE) In the Progressive mode, better pictures can be enjoyed. IMPORTANT • In order to enjoy pictures in the Progressive mode, connect this system and your TV with component video cord. • If your TV does not have component video input terminal, leave the setting Interlace mode. Press and hold SCAN MODE for 4 seconds when there is no disc loaded or while the disc is stopped. • Each time you press and hold the button, the scan mode alternates between the "PROGRESSIVE" mode and the "INTERLACE" mode. NOTE Progressive mode: All scanning lines will be displayed at once. Pictures of higher resolution than those in the Interlace mode can be realized. Interlace mode: This is a conventional image method. Half of the scanning lines displayed in the Progressive mode will appear, alternating with the other half.