JVC FS-SD550 User Manual - Page 19

Using the Timers SLEEP REMOTE CONTROL DIMMER SLEEP POWER AUTO DISPLAY PRESET FM MODE PROGRAM RANDOM REPEAT DOOR AHB PRO SLIDE CD BASS TREBLE CANCEL UP SET FADE MUTING DOWN CD MD/AUX FM / AM VOLUME MD/AUX FM/AM PRESET TUNING AHB PRO CD DOWN UP MULTI CONTROL CLOCK TIMER VOLUME TIMER 4 ¢ CLOCK ON time, OFF time, Source, Volume Timer indicator SLEEP SLEEP indicator * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. The timers let you control listening functions automatically. Setting the Clock • Use the Unit's button to set the clock. • When you plug the AC power cord into the wall outlet, the time indication "AM 12:00" blinks on the display. • The clock must be correctly set for the timers to work. • The procedure must be completed within two minutes. Otherwise, the setting is cleared and must be repeated from the beginning. 1 Press the POWER button. Then, the Unit's top buttons appear. CLOCK CD DOWN UP MULTI CONTROL CLOCK (for 2 seconds) 2 Press the CLOCK button on the Unit for more than two seconds. The hour digit of the time indication rapidly blinks on the display. 3 Press the ¢ or 4 button on the Unit to set the hour. Pressing the ¢ button moves the time forwards and pressing the 4 button moves it backwards. Hold down the button to move the time rapidly. 4 Press the CLOCK button. The minute digits of the time indication rapidly blink on the display. 5 Press the ¢ or 4 button to set the minute. 6 Press the CLOCK button. The selected time is set and the seconds start counting from 0. CAUTION: • If there is a power failure, the clock loses its setting after about 20 minutes. "AM 12:00" blinks on the display and the clock must be reset. • The clock may gain or lose one to two minutes per month. Setting the Daily Timer Once you have set the Daily Timer, the timer will be activated at the same time every day. The Timer indicator on the display shows that the Daily Timer you have set is in effect. • Use the Unit's button to set the timer. • Perform each setting within 30 seconds. Otherwise, setting will be cleared and the procedure must be repeated from the beginning. 17