JVC G300 Instruction Manual - Page 33
Troubleshooting
UPC - 046838008214
View all JVC G300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General FM/AM • Sound cannot be heard from the speakers. The volume level is set to the Adjust it to the optimum level. minimum level. Connections are incorrect. Check the cords and connections. • This unit does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. While holding SEL (select), press (standby/on attenuator) for more than 2 seconds to reset the unit. (Your preset adjustments will also be erased.) (See page 2.) • SSM (Strong-station Sequential Memory) automatic preset does not work. Signals are too weak. Store stations manually. • Static noise while listening The antenna is not connected Connect the antenna firmly. to the radio. firmly. • Disc automatically ejects. Disc is inserted upside down. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. CD-R/CD-RW is not finalized. • Insert a finalized CD-R/ CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • Disc can be neither played Disc is locked. back nor ejected. Unlock the disc. (See page 16.) The CD player may have functioned incorrectly. While holding (standby/on attenuator), press 0 (eject) for more than 2 seconds. Be careful not to drop the disc when it is ejected. • Disc sound is sometimes interrupted. You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect. Check the cords and connections. • "NO DISC" appears on the No disc in the loading slot. display. Insert a disc into the loading slot. Disc is inserted incorrectly. Insert the disc correctly. Disc Playback 33