JVC GD-V502U Instruction Manual - Page 20

Adjusting PICTURE POSITION/SIZE Adjusting screen PICTURE 1 POS. /SIZE 2 Press to display the PICTURE POS./ SIZE menu. Press to select H-POS / H-SIZE / V-POS / V-SIZE / CLOCK PHASE. INPUT SURROUND VOL N R PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE PICTURE POS. /SIZE ASPECT During "VIDEO (S VIDEO)" and "COMPONENT" input signal. During "RGB" and "PC" input signal. PICTURE POS./SIZE NORMALIZE H-POS H-SIZE V-POS V-SIZE NORMAL PICTURE POS./SIZE NORMALIZE NORMAL H-POS H-SIZE V-POS V-SIZE CLOCK PHASE 3 Press to adjust POS./ SIZE. R Press to exit from adjust mode. When the Position Left " " button is pressed. PC OFF TIMER PLASMA DISPLAY Notes: (1) Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB / PC signals are memorized for each frequency.) (2) If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the PICTURE POS./ SIZE function. When the Position Right " " button is pressed. H-POS H-SIZE When the Position Left " " button is pressed. When the Position Right " " button is pressed. V-POS When the Position Left " " button is pressed. When the Position Right " " button is pressed. V-SIZE When the Position Left " " button is pressed. When the Position Right " " button is pressed. CLOCK PHASE Flickering and distortion can be eliminated by using the Position Left " " or Right " " button to (RGB / PC in Mode) carry out adjustment. Note: Using the size adjustment function to display a picture with the aspect ratio changed from the original for the purpose of the public display or commercial gain may infringe on copyright laws. Helpful Hint ( N / NORMALIZE Normalization) While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the (ACTION button) is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. 20