JVC GD-V502U Instruction Manual - Page 26

SCREENSAVER (For preventing after-images) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. 1 SET UP Press to display the SETUP menu screen. 2 Press to select the SCREENSAVER. SET UP 1/2 COMPONENT/RGB-IN SELECT RGB INPUT LABEL RGB1 SIGNAL SCREENSAVER POWER SAVE OFF STANDBY SAVE ON POWER MANAGEMENT OFF OSD LANGUAGE ENGLISH (US) Press to select the SCREENSAVER screen. NEGATIVE / SCROLL selection 3 Press to select the FUNCTION. Press to select the desired function. WHITE BAR SCROLL NEGATIVE SCREENSAVER PRESENT TIME OF DAY 10 : 00 START FUNCTION WHITE BAR SCROLL MODE OFF START TIME 0 : 00 FINISH TIME 0 : 00 SIDE BAR ADJUST BRIGHT WOBBLING OFF PEAK LIMIT OFF WHITE BAR SCROLL : A white bar will scroll from left to right. NEGATIVE : A negative image will be displayed on the screen. MODE selection 4 Press to select the MODE. Press to select each mode items. OFF SCREENSAVER PRESENT TIME OF DAY 10 : 00 START FUNCTION WHITE BAR SCROLL MODE OFF START TIME 0 : 00 FINISH TIME 0 : 00 SIDE BAR ADJUST BRIGHT WOBBLING OFF PEAK LIMIT OFF START setting 5 INTERVAL : Operates when SHOW DURATION and SAVER DURATION are set up and those times arrive. TIME OF DAY : Operates when START TIME and FINISH TIME are set up and those times arrive. ON : Operates when START is selected and the (ACTION) is pressed. SCREENSAVER When the Mode is set to ON, press to select START. PRESENT TIME OF DAY 10 : 00 START FUNCTION WHITE BAR SCROLL MODE ON START TIME 0 : 00 FINISH TIME 0 : 00 SIDE BAR ADJUST BRIGHT Press to start SCREENSAVER. WOBBLING OFF PEAK LIMIT OFF The menu screen will disappear and the SCREENSAVER will be activated. To stop the SCREENSAVER under ON, press the R button. Note: This function does not guarantee the complete prevention of permanent after-images. The potential for the occurrence of permanent after-images is merely decreased. 26