JVC GM-P420UG Instruction Manual - Page 27

Confirming the Use Time and Model Name You can confirm the hours of use and the model name on the Setup Menu. This may be necessary when you ask for any service. 1 On the remote control: Press MENU/EXIT while holding VOLUME - to display the Setup Menu. On the Monitor: Press MENU while holding 2 to display the Setup Menu. SET-UP MENU STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE WHITE BALANCE 1/2 : OFF : OFF : MODE1 : 1080i Showing the On-screen When Changing the Input Mode With this function, you can see the selected input mode and signal type when changing the input mode. 1 On the remote control: Press MENU/EXIT while holding VOLUME - to display the Setup Menu. On the Monitor: Press MENU while holding 2 to display the Setup Menu. Cursor (3) SET-UP MENU STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE WHITE BALANCE 1/2 : OFF : OFF : MODE1 : 1080i ADJUST: SELECT: EXIT: MENU ADJUST: SELECT: EXIT: MENU 2 Keep pressing 5/∞ until the second page of the Setup Menu appears. • The Setup Menu consists of two pages. If you keep pressing 5/∞, you can move to the other page from the current page. SET-UP MENU 2/2 PIXEL SHIFT : ON POWER SAVE : ON COLOR-REVERSE : ON REFRESH : ON reset all reset HOUR METER x100h : 001 MODEL NAME : GM-P421U ADJUST: SELECT: EXIT: MENU Hours of use and model name 3 Confirm the hour of use and model name. • The displayed value for the hours of use is divided by 100. To calculate the actual hours of use, multiply the displayed value by 100. • The model name shown on the Setup Menu is an example. If you have a different model, its correct model name will be shown (GM-P420UG). 4 Press MENU/EXIT (or MENU on the Monitor) once to exit from the menu operations. Notes: • The value for the hours of use is added by one hour unit. If you use the monitor within one hour, it will not be added to the hours of use. • The period when the monitor is on standby (the power lamp glows orange) will not be added to the hours of use. 2 Press 5/∞ to move the cursor (3) to "STATUS DISPLAY." • The Setup Menu consists of two pages. If you keep pressing 5/∞, you can move to the other page from the current page. 3 Press 2/3 to select the desired setting. Each time you press the button, the Status Display function alternates between "ON" and "OFF." To cancel the Status Display function, select "OFF." 4 Press MENU/EXIT (or MENU on the Monitor) once to exit from the menu operations. Prohibiting the Monitor's Button Operations This function allows you to prohibit the button operations on the Monitor to prevent malfunction or avoid tampering. 1 On the remote control: Press MENU/EXIT while holding VOLUME - to display the Setup Menu. On the Monitor: Press MENU while holding 2 to display the Setup Menu. Cursor (3) SET-UP MENU STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE WHITE BALANCE 1/2 : OFF : OFF : MODE1 : 1080i ADJUST: SELECT: EXIT: MENU (To be continued on the next page) 25