JVC GM-P420UG Instruction Manual - Page 35

Setup Menu SET-UP MENU STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE WHITE BALANCE 1/2 : OFF : OFF : MODE1 : 1080i ADJUST: SELECT: EXIT: MENU * SET-UP MENU 2/2 PIXEL SHIFT : ON POWER SAVE : ON COLOR-REVERSE : ON REFRESH : ON reset all reset HOUR METER x100h : 001 MODEL NAME : GM-P421U ADJUST: SELECT: EXIT: MENU White Balance Adjustment Menu WHITE BALANCE:HIGH R GAIN G GAIN B GAIN sub menu reset : 000 :+ 001 :- 002 ADJUST: SELECT: EXIT: MENU R GAIN - G GAIN - B GAIN - : 000 + :+001 + :-002 + reset Are you sure? "YES" then key. "NO" then MENU key. reset Are you sure? "YES" then key. "NO" then MENU key. all reset Are you sure? "YES" then key. "NO" then MENU key. * The model name shown on the Setup Menu is an example. If you have a different model, its correct model name will be shown (GM-P420UG). STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE WHITE BALANCE PIXEL SHIFT POWER SAVE COLOR-REVERSE REFRESH reset all reset HOUR METER MODEL NAME Sets if you want the input terminal and the type of signal to be indicated on the screen just after inputs are switched. (See page 25.) Sets the Monitor so that it cannot be operated with the buttons on itself. (See page 25.) Set the selectable input terminals when controlling the Monitor with the external control unit (See page 26.) Select the High-Definition (HD) signal type. (See page 27.) Adjusts R GAIN, G GAIN and B GAIN finely each for "HIGH" and "LOW" settings of the color temperature. (See page 19.) Sets a screen saver. (See page 27.) Sets the power save function. (See page 28.) Use to reverse the color of the still picture to prevent its afterimage from being left on the screen. (See page 28.) Use to eliminate afterimages on the screen. (See page 29.) Resets the Setup Menu settings to defaults. (See page 29.) Resets the all menu settings and adjustments to defaults. (See page 30.) Use to confirm the hours of use. (See page 25.) Use to confirm your model name. (See page 25.) 33