JVC GR-D370 Instruction Manual - Page 35

MENUS FOR DETAILED ADJUSTMENT EN 35 DISPLAY ● The following menu settings can be changed only when the Power Switch is set to "REC". ● The DISPLAY settings except "BRIGHT" and "LANGUAGE" are effective only for shooting. [ ] = Factory-preset BRIGHT ੬ pg. 18, "Brightness Adjustment Of The Display" CLOCK ADJ. ੬ pg. 17, "Date/Time Settings" ● Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume. NOTES: ● If a cassette is in the camcorder, the demonstration cannot be turned on. ● "DEMO MODE" remains "ON" even if the camcorder power is turned off. DSC [ ] = Factory-preset LANGUAGE ENGLISH / FRANÇAIS / DEUTSCH / ESPAÑOL / ITALIANO / NEDERLANDS / PORTUGUÊS / / B.MELAYU / / / [ ] / The language setting can be changed. (੬ pg. 17) DATE/TIME [OFF]: The date/time does not appear. ON: The date/time is always displayed. ● The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control. (੬ pg. 24, 43) ON SCREEN LCD: Keeps the camcorder's display (except the date, time and time code) from appearing on the connected TV screen. [LCD/TV]: Makes the camcorder's display appear on screen when the camcorder is connected to a TV. QUALITY [FINE] / STANDARD The Picture Quality mode can be selected to best match your needs. Two Picture Quality modes are available: FINE ( ) and STANDARD ( ) (in order of quality). NOTE: The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used. (੬ pg. 27) REC SELECT [ (TAPE)]: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to "VIDEO", still images are recorded only onto the tape. / (TAPE/CARD): When Snapshot recording is performed with the VIDEO/ MEMORY Switch set to "VIDEO", still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels). ADVANCED FEATURES TIME CODE [OFF]: Time code is not displayed. ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. (੬ pg. 22) DEMO DEMO MODE OFF: Automatic demonstration will not take place. [ON]: Demonstrates certain functions such as Wipe/Fader and Effects, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases: ● When the Menu Screen is closed after "DEMO MODE" is turned "ON". ● With "DEMO MODE" set to "ON", if there is no operation for about 3 minutes after the Power Switch is set to "REC".