JVC GY-HM890U Instruction Manual - Page 200

.. Setting Distribution 1 Set the [Record Format] according to the resolution and frame rate of the video to be distributed. Settable Resolution during Streaming/No. of Frames 1920x1080 1280x720 720x480 720x576 480x270 1920x 60i,30p 60i 30p(*) 60i 30p 1080 50i,25p 50i 25p(*) 50i 25p 1440x 60i 1080 50i 60i 30p(*) 60i 30p 50i 25p(*) 50i 25p 1280x 60p,30p 720 50p,25p 30p 60i 30p 25p 50i 25p 720x 480 60i 60i 30p Record Format Resolution/No. of Frames 720x 576 50i 50i 25p * This item cannot be selected when [Main Menu] B [System] B [Record Set] B [Record Format] B [System] is set to "HD(SDI In)". Memo : 0 Live streaming cannot be performed in the following cases. 0 When [Main Menu] B [System] B [Record Set] B [Record Format] B [System] is set to "HD+SD" or "HD+Web" 0 When [Main Menu] B [System] B [Record Set] B [Record Format] B [WFrame & Bit Rate] is set to "24p" 2 Set the Resolution and Frame & Bit Rate for the video to be distributed. Specify the settings in [Main Menu] B [System] B [Network]/[Settings] B [Live Streaming Set]. (A P137 [ Live Streaming Set ] ) 3 Set the distribution protocol. Specify the settings in [Main Menu] B [System] B [Network]/[Settings] B [Live Streaming Set] B [Type]. (A P139 [ Type ] ) 4 Set items related to the distribution protocol. Set each of the [Main Menu] B [System] B [Network]/[Settings] B [Live Streaming Set] B [UDP/TCP Settings]/[RTSP/RTP Settings]/ [ZIXI Settings] items. (A P139 [ UDP/TCP Settings ] ) (A P139 [ RTSP/RTP Settings ] ) (A P139 [ ZIXI Settings ] ) Starting Distribution 1 Perform the necessary settings for the decoder device or the PC application. For details on the settings, please refer to the instruction manual of the respective devices and applications. Memo : 0 If there is an NAT router within the communication path between the camera and the decoder, port forwarding setup is required. For details on the settings, please refer to the instruction manual of the router in use. 0 The following parameters are required when connecting to this camera recorder using the RTSP/RTP. Port number: 554 Stream ID: stream 0 Use the following to access via URL. rtsp://:554/ stream 2 With the network connection established, set [Live Streaming] to "On". (A P174 [Preparing Network Connection] ) 0 Set [Main Menu] B [System] B [Network]/ [Settings] B [Live Streaming Set] B [Live Streaming] to "On". 0 The network connection mark appears on the display screen when a network connection is established. 282min 100min 50min 1920x1080 60 i HQ 00: 00: 00.00 Jan 24, 2014 12 :34 :56 P13000K 5.6f t ND 1 /64 AE+6 0dB F1. 6 1/ 100 Connecting to the Network 200 Performing Live Streaming