JVC GY-HM890U Instruction Manual - Page 70

Shooting .. Adjusting Audio Recording Level 0 You can select to adjust the audio recording levels for each of the four channels (CH-1/CH-2/ CH-3/CH-4) manually or automatically. 0 Set CH-1/CH-2 using the switch, and CH-3/ CH-4 using the menu. Memo : 0 For the recorded audio, you can set items such as [Threshold Level], [Attack Time] or [Decay Time] in [CH1 Limiter] or [CH2 Limiter]. 0 If [CH1 Limiter]/[CH2 Limiter] B [Threshold Level] is set to a value other than "Off", the limiter operates according to the value set. 0 You can adjust the level manually during the recording, recording standby, and stop modes. (A P128 [CH1 Limiter/CH2 Limiter] ) 0 Set the reference audio level of [CH-1] and [CH-2] to be recorded on SD cards in the [Main Menu] B [A/V Set] B [Audio Set] B [CH1/2 Ref. Level] menu to "-20dB", "-18dB", or "-12dB". (common for CH-1/CH-2) (A P127 [ CH1/2 Ref. Level ] ) For CH-1/CH-2 o Adjusting manually 1 Set the [AUDIO SELECT CH-1/CH-2 AUTO/ MANUAL] selection switch to "MANUAL" for the channel to be adjusted manually. 2 Turn the [AUDIO LEVEL CH-1/CH-2] adjustment knob corresponding to the channel to adjust the level. When [Audio Set] B [CH1 Limiter]/[CH2 Limiter] B [Threshold Level] is set to "Off", adjust such that the audio level meter does not light up at -2 dB even for loud sounds. (A P128 [ CH1/2 Limiter Mode ] ) 00: 00: 00.00 Jan 24,2014 12 :34 :56 P13000K 5.6f t ND 1 /64 AE+6 0dB F1. 6 1/ 100 4 Channels o Adjusting automatically Set the [AUDIO SELECT CH-1/CH-2 AUTO/ MANUAL] selection switch to "AUTO" or the [FULL AUTO] switch to "ON" to enter Automatic Adjustment mode. The audio recording level is set automatically according to the input level. Memo : 0 When the [FULL AUTO] switch is set to "ON", mode switching of the [AUDIO SELECT CH-1/ CH-2 AUTO/MANUAL] selection switch is disabled. 0 When [Main Menu] B [A/V Set] B [Audio Set] B [CH1 Limiter]/[CH2 Limiter] B [Threshold Level] is set to "Off" while in the automatic adjustment mode, the limiter operates at -6dBFS. 0 If [CH1 Limiter]/[CH2 Limiter] B [Threshold Level] is set to a value other than "Off", the limiter operates according to the value set. (A P128 [CH1 Limiter/CH2 Limiter] ) 0 When [Main Menu] B [Camera Function] B [FULL AUTO] B [Audio] is set to "SW Set", you can switch the audio recording mode with the [AUDIO SELECT CH-1/CH-2 AUTO/MANUAL] selection switch on the camera recorder even when the [FULL AUTO] switch is set to "ON". (A P114 [ Audio ] ) -2dB 4030 20 10 0 2 Channels 70 Audio Recording