JVC GZ-E300 User Guide - Page 200
Using Wi-Fi by Creating a QR Code GZ-EX355/GZ-EX310
View all JVC GZ-E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310) 6 Select the SSID in step 5 from the Wi-Fi network selection screen of your smartphone, and enter the PASS on the password screen. (Operation on the smartphone (or computer)) 0 The top menu appears. 2 Tap the "Wi-Fi" (Q) icon. (Operation on this camera) 3 Tap the "DIRECT MONITORING" (N) icon in the "Wi-Fi" menu. (Operation on this camera) 0 For details on connecting your smartphone (or computer) to a Wi-Fi network, please refer to the instruction manual of the phone terminal in use. 7 A connection is established and Q appears on the camera's screen. 4 Tap "START" (I). (Operation on this camera) o Connection by Wi-Fi Protected Setup (WPS) 1 Tap "MENU". (Operation on this camera) Set the camera to the recording mode. 0 When iFrame is selected for "VIDEO REC FORMAT", the following display appears and recording mode is switched to the 60i mode in AVCHD. 0 This display disappears automatically after approximately 3 seconds, but disappears immediately if the screen is tapped. 0 The top menu appears. 2 Tap the "Wi-Fi" (Q) icon. (Operation on this camera) 5 Check the SSID and the PASS being displayed on the screen of the camera. 3 Tap the "DIRECT MONITORING" (N) icon in the "Wi-Fi" menu. (Operation on this camera) 200 4 Tap "START" (I). (Operation on this camera)