JVC GZ-E300 User Guide - Page 91
Preparing a BD Writer (External Blu-ray Drive), Copying
View all JVC GZ-E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
. .. Copying Preparing a BD Writer (External Blu-ray Drive) Memo : 0 When connecting this unit to the BD writer (external Blu ray drive), use an Mini-A (male) - B (male) USB conversion cable. Please note that the supplied USB cable cannot be used for this purpose. 0 To use the USB cable provided with the BD writer (external Blu-ray drive), purchase the following USB conversion cable. (Part number: QAM0852-001) * Mini-A (Male) - A (Female) *Consult your nearest service center. 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. 4 Insert a new disc. A Press the eject button to open the disc tray. B Load a new disc properly. C Press the eject button to close the disc tray. Caution : 0 Be sure to turn off the power when connecting the devices. Otherwise, electric shocks or malfunctions may occur. 0 Do not connect the AC adapter provided with this unit to the BD writer. 0 Do not connect the AC adapter provided with the BD writer to this unit. 3 Connect the USB cable and the AC adapter. A Connect the USB cable of the BD writer (external Blu-ray drive) to this unit. 0 The USB cable provided with this unit cannot be used. B Connect the AC adapter of the BD writer (external Blu-ray drive). C Turn on the BD writer (external Blu-ray drive). D Connect the AC adapter to this unit. 0 This unit powers on automatically when the AC adapter is connected. 0 This unit turns on and the "BACK-UP" menu appears. 0 While the USB cable is connected, the "BACK-UP" menu is displayed. 0 Refer also to the instruction manual of the BD writer (external Blu-ray drive). 91