JVC GZ-HM200AUS Guide Book - Page 73
Cleaning
UPC - 046838038853
View all JVC GZ-HM200AUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
ENGLISH Indication POWER IS OFF, OR USB DEVICE IS UNSUPPORTED Action • Turn on the power of the connected USB device. • Connect the AC adapter to the BD/DVD burner. DVD-RW DISC HAS BEEN ALREADY USED • Replace the disc of the BD/DVD burner with another disc. FINALIZATION FAILED • Replace the disc of the BD/DVD burner with another disc. NO FILES • Slide the mode switch to select the desired mode (! or #). VIDEO MANAGEMENT FILE IS DAMAGED, RECOVERY IS REQUIRED TO RECORD/ PLAYBACK, RECOVER? • Select [OK] to restore. NO EVENT REGISTERED SCENES • Register events to the files before you start recording. CANNOT DETECT FACE • Turn the face detection mode on before you perform recording or snapshot. Cleaning Before cleaning, turn off the camcorder and remove the battery pack and AC adapter. To clean the camcorder Wipe the camcorder gently with a soft cloth. If the camcorder is particularly dirty, dip the cloth into diluted mild soap and wring it out well. After wiping with the wet cloth, wipe again with a dry cloth. To clean the LCD monitor Wipe the monitor gently with a soft cloth. Be careful not to damage the monitor. To clean the lens Wipe gently with lens cleaning paper. NOTE • Avoid using strong cleaning agents such as benzine or alcohol. • Mold may form if the lens is left dirty. • When using a cleaner or chemically treated cloth, refer to the cautions for each product. FURTHER INFORMATION 73