JVC GZ MG330 Instruction Manual - Page 14
Necessary Settings before Use - everio ac adapter
UPC - 689466111033
View all JVC GZ MG330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Necessary Settings before Use Charging the Battery Pack 1 Close the LCD monitor to turn off the camera. 2 Attach the battery pack. Slide the battery pack down until it locks in place. Bottom of the Camera BATT. 3 Connect the AC adapter. DC Jack NOTES • You can also use the camera with just the AC adapter. • Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter. Date/Time Setting 1 Open the LCD monitor to turn on the camera. 2 When [SET DATE/TIME!] appears, select [YES] within 10 seconds. SET DATE/TIME! YES NO If you do not select within 10 seconds, the screen disappears. In such case, press and hold the POWER button and turn the camera on again. 3 Set the date and time. AC Adapter To AC Outlet (110V to 240V) • You can also connect the AC adapter using the Everio dock connector.* (੬ pg. 9) * GZ-MG330 model does not include the Everio dock. • The charge lamp blinks to indicate charging has started. • When the lamp goes out, charging is finished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera. - To detach the battery pack Slide and hold BATT. (੬ step 2), then remove the battery pack. - To check the remaining battery power See page 15. 14 DATE TIME JAN 31 2007 11 07 AM Repeat this step to input the month, day, year, hour and minute. 4 Touch the OK button to finish. - To change the date and time 1) Touch the MENU button. 2) Select [BASIC SETTINGS], and then [CLOCK ADJUST]. 3) Set the date and time. - To return to the previous screen Select !. - To quit the screen Touch the MENU button.