JVC GZ MG330 Instruction Manual - Page 33
Troubleshooting
UPC - 689466111033
View all JVC GZ MG330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH FURTHER INFORMATION Troubleshooting The camera is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. The following phenomena are not malfunctions. • The camera heats up when it is used for a long time. • The battery heats up during charging. • When playing back a video file, the image stops momentarily or the sound is interrupted at junctions between scenes. • To solve the problem, first follow the instructions below. • If the problem is not solved, reset the camera. (੬ below) • If the problem persists, please consult your nearest JVC dealer. - To reset the camera 1) Close the LCD monitor to turn off the camera and remove the power supply (battery pack or AC adapter) from the camera, then reattach it. 2) Select [FACTORY PRESET] from the MENU. Power Trouble Action ੬ • Connect the AC adapter securely. 14 No power is supplied. • Detach the battery pack once again and reattach it firmly. 14 • Replace the dead battery with a fully charged one. - The power does not • Make sure to use the camera under appropriate operating 36 turn on, or the battery temperatures. operation time is • The battery is worn out and needs to be replaced. Please - extremely short even purchase a new one. after the battery is fully charged. The access/charge lamp on the camera does not light during charging. • Charging may stop in places subject to extremely high/low - temperatures to protect the battery. It is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F). • When the battery is already fully charged, the lamp does 15 not light. Check the remaining battery power. Recording cannot be • Recording medium is full. Delete unnecessary files or replace the microSD card. 20 performed. • Select the recording medium properly. - During recording, the • Touch the DISP button once. 13 date/time does not appear. During video recording, the 7REC indicator • The temperature of the camera is increasing. If the camera continues to heat up, recording may be stopped to protect the recording medium. In this case, turn off the - flashes. power, and then wait until the camera cools down. Digital zoom does not work. • Change the settings in [ZOOM]. • Digital zoom is not available in the still image recording mode. - - Recording 33