JVC GZ-MG77 Instructions - Page 14
Necessary Settings before Use, Power Related Preparations (Using the Battery Pack)
View all JVC GZ-MG77 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 EN Necessary Settings before Use Be sure to configure the following three settings before use. Power Related Preparations (Using the Battery Pack) 1 Set the power switch to OFF. Slide while pressing down the lock button. Power off Playback Recording Lock button 2 Attach the battery pack. Slide the battery pack down until it locks in place. Bottom of the Camera BATT. 3 Charge the battery pack by connecting to the AC adapter. Open the cover. DC Connector AC Adapter (ex. AP-V14U) To AC Outlet (110V to 240V) ● The power/charge lamp blinks to indicate charging has started. ● When the lamp goes out, charging is finished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera. Controls in this section Power Switch Power/Charge Lamp To detach the battery pack Slide and hold BATT. (੬ step 2), then remove the battery pack. To check the remaining battery power (੬ pg. 16) Required charging / recording time Battery pack Charging time Recording time BN-VF707U (Provided) 1 hr. 30 min. 1 hr. BN-VF714U 2 hr. 40 min. 2 hr. 5 min. BN-VF733U 5 hr. 40 min. 4 hr. 55 min. The times shown above are approximate times. NOTE: You can also use the camera with just the AC adapter. INDEX / / / / 49 MENU