JVC GZ MS130BU Instructions - Page 18

Other Settings Continued

Get JVC GZ MS130BU - Everio Camcorder - 800 KP PDF manuals and user guides View all JVC GZ MS130BU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Other Settings (Continued) Using an SD Card If you want to record to an SD card, the following operations need to be performed. • Operations are confirmed on the following SD cards: Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB). • If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded. • MultiMediaCards are not supported. • Cards used to record video on this camcorder cannot be played back on other devices. • Some card readers (including internal card readers in PCs) may not be able to support SDHC format. If you use an SDHC card for recording and encounter any reading error, the card reader you are using might be a non-SDHC supported device. Please use the camcorder or other SDHC compatible devices to access the card. NOTE • Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted. • Do not touch the terminal on the reverse side of the label. 3 Change the recording medium The camcorder is programmed to record on the BUILT-IN MEMORY flash when it is shipped from the factory. You can change the recording medium to SD card. Set [REC MEDIA FOR VIDEO] to [SD CARD) and [REC MEDIA FOR IMAGE] to [SD]. MEDIA SETTINGS REC MEDIA FOR VIDEO REC MEDIABUFOILRT-IIMNAMGEMORY FORMAT BSUDILTC-INARMDEM. FORMAT SD CARD ERASE ALL DATA ON MEMORY CARD SET QUIT 2 Insert an SD card Preparation: Press Power (1) button to turn off the camcorder. 1 Open the SD card cover. 2 Firmly insert the card with its clipped edge first. Clipped Edge 4 Format an SD card when using it for the first time Select [FORMAT SD CARD] to format the card. MEDIA SETTINGS REC MEDIA FOR VIDEO REC MEDIA FOR IMAGE FORMAT BUILT-IN MEM. FORMAT SD CARD ERASE ALL DATA ON SET QUIT 3 Close the SD card cover. - To remove an SD card Push the SD card once. After the card comes out a little, pull it out. It is recommended to copy your important recorded data to a DVD or other recording media for storage. JVC will not be responsible for any lost data. EN18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
EN18
Using an SD Card
If you want to record to an SD card, the
following operations need to be performed.
•
Operations are confirmed on the following
SD cards: Class 4 or higher compatible
SD or SDHC card Panasonic, TOSHIBA,
SanDisk, ATP SD card (256 MB to 2 GB) or
SDHC card (4 GB to 32 GB).
•
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
•
MultiMediaCards are not supported.
•
Cards used to record video on this
camcorder cannot be played back on other
devices.
•
Some card readers (including internal card
readers in PCs) may not be able to support
SDHC format.
If you use an SDHC card for
recording and encounter any reading error,
the card reader you are using might be a
non-SDHC supported device.
Please use
the camcorder or other SDHC compatible
devices to access the card.
Q
Insert an SD card
Preparation:
Press Power (
1
) button to turn off the
camcorder.
1
Open the SD card cover.
2
Firmly insert the card with its clipped
edge first.
3
Close the SD card cover.
L
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
Clipped Edge
NOTE
•
Insert and remove the SD card only while
the power is turned off. Otherwise, data on
the card may be corrupted.
•
Do not touch the terminal on the reverse
side of the label.
R
Change the recording medium
The camcorder is programmed to record on
the BUILT-IN MEMORY flash when it is
shipped from the factory. You can change the
recording medium to SD card.
Set [REC MEDIA FOR VIDEO] to [SD
CARD) and [REC MEDIA FOR IMAGE]
to [SD].
ERASE ALL
D
A
A
A
A ON
T
T
REC MEDIA FOR
VIDEO
REC MEDIA FOR IM
A
GE
FORM
A
A
A
B
UI
L
L
-IN MEM
T
T
.
FORM
A
T SD CARD
A
A
MEMO
R
Y CARD
R
R
QUIT
SET
MEDIA SETTINGS
BUILT-IN MEMORY
S
D CARD
S
Format an SD card when using it for
the first time
Select [FORMAT SD CARD] to format
the card.
ERASE ALL DATA ON
MEDIA SETTINGS
REC MEDIA FOR VIDEO
REC MEDIA FOR IM
AGE
FORMATBUILT-IN MEM.
FORMAT SD CARD
QUIT
SET
It is recommended to copy your important
recorded data to a DVD or other recording
media for storage. JVC will not be
responsible for any lost data.
Other Settings (Continued)