JVC GZMG730BUS Guidebook - Page 48
Using a, VCR/DVD Recorder to Dub, Files from the Camera
UPC - 046838033483
View all JVC GZMG730BUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Copying Files (Continued) Using a VCR/DVD Recorder to Dub Files from the Camera Preparation: • Set [SWITCH TO ANALOG I/O] to [OUTPUT]. (Factory-preset = [OUTPUT]) (p. 65) • Turn off all units. AV Jack DC Jack To AC Outlet AC Adapter AV Cable VCR/DVD Recorder 1 Set the VCR/DVD recorder to its AUX input mode. 2 Start playback on the camera. • To play back videos (p. 28) • To play back playlists ("When dubbing playlists using a VCR/ DVD recorder" : p. 39) 3 At the point you want to start dubbing, start recording on the VCR/ DVD recorder. Refer to the VCR/DVD recorder's instruction manual. - To stop dubbing Stop recording on the VCR/DVD recorder, then press the START/STOP button again. NOTE To record only the date information among the display indications, set [DISPLAY ON TV] to [ON], and touch the OK button until date/time indication appears. (p. 67) AV Input Jack You can also connect the cables using the jacks on the Everio dock connectors. The S-Video or DV cable (optional) enables even higher dubbing quality. (p. 10) When other devices such as a DVD burner are connected to the Everio dock, turn the power of these devices off. 48