JVC KD-ADV38 Instructions - Page 286

ENGLISH Menu items Selectable settings, [reference page] Tuner IF Band Width Auto : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Wide : Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. AV Input You can determine the use of LINE IN and VIDEO IN plugs. Off : Select when no component is connected ("AV-IN" is skipped while selecting the source). Audio&Video : Select when connecting an AV component such as a VCR. Audio : Select when connecting an audio component such as a digital audio player. Camera*8: Select when connecting the rear view camera. Camera Mirror*8: The mirror image of the rear view is displayed on the monitor. (The monitor on the unit only; the normal rear view appears on the external monitor.) Navigation : Select when connecting a Navigation System. ☞ [41] Input External Input*9 For connecting an external component to the CD changer jack on the rear. Changer/iPod/D. Player*10: CD changer, iPod, or D. player ☞ [38, 40] External Input : Any other than the above. ☞ [42] Beep Off : Cancels. On : Activates the key-touch tone. Others Telephone Muting*11 Off : Cancels. Muting1, Muting2 : Select either one which mutes the sounds while using the cellular phone. Initialize Initialize all settings you have made in . Press ENT, then reset the unit. (☞ page 3) *8 Reverse lamp lead connection is required. See Installation/Connection Manual (separate volume). The rear view through the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you shift the gear to the reverse (R) position. *9 Not selectable when the component connected to the CD changer jack is selected as the source. *10 The name of the component detected through the CD changer jack is shown. *11 The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume). 50