JVC KD-AR270 Instructions - Page 10
General settings - PSM - how to set clock on
View all JVC KD-AR270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH General settings - PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 3 Adjust the PSM item selected. 2 Select a PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [5]. DEMO OFF : Cancels. CLOCK H 1 - 12, [5] Hour adjustment [Initial: 1 (1:00)] CLOCK M 00 - 59, [5] Minute adjustment [Initial: 00 (1:00)] DIMMER Dimmer ON : Dims the display illumination of this unit. OFF : [Initial]; Cancels. SCROLL*1 Scroll ONCE : [Initial]; Scrolls the disc information once. AUTO : Repeats scrolling (5-second intervals in between). OFF : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting. WOOFER*2 Subwoofer cutoff frequency LOW MID HIGH : Frequencies lower than 55 Hz are sent to the subwoofer. : [Initial]; Frequencies lower than 85 Hz are sent to the subwoofer. : Frequencies lower than 115 Hz are sent to the subwoofer. *1 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *2 Displayed only when "L/O MODE" is set to "WOOFER." 10