JVC KD-AR270 Instructions - Page 9

ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer). Adjusting the sound You can adjust the sound characteristics to your preference. Ex.: When "ROCK" is selected *1 Displayed only when "L/O MODE" is set to "WOOFER" (see page 11). Preset values BAS TRE LOUD Indication (For) (bass) (treble) (loudness) USER (Flat sound) 00 00 OFF ROCK (Rock or disco music) +03 +01 ON CLASSIC (Classical music) +01 -02 OFF POPS (Light music) +04 +01 OFF HIP HOP (Funk or rap music) +02 00 ON JAZZ (Jazz music) +02 +03 OFF Indication, [Range] BAS*2 (bass), [-06 to +06] Adjust the bass. TRE*2 (treble), [-06 to +06] Adjust the treble. FAD*3 (fader), [R06 to F06] Adjust the front and rear speaker balance. BAL*4 (balance), [L06 to R06] Adjust the left and right speaker balance. LOUD*2 (loudness), [LOUD ON or LOUD OFF] Boost low and high frequencies to produce a well-balanced sound at low volume level. SUB. W*5 (subwoofer), [00 to 08] Adjust the subwoofer output level when a subwoofer is connected. VOL (volume), [00 to 30 or 50*6] Adjust the volume. *2 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including "USER." *3 If you are using a two-speaker system, set the fader level to "00." *4 This adjustment cannot affect the subwoofer output. *5 This takes effect only when a subwoofer is connected. *6 Depending on the amplifier gain control setting. (See page 11 for details.) 9