JVC KD-R460 Instruction Manual - Page 25

Wiring connection KD-AR765S KD-R760 / KD-R660 KD-AR565 / KD-R460 Front/ rear/ subwoofer output Vehicle dashboard Signal cord (not supplied) Fuse (10 A) JVC Amplifier*1 *1 Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging the unit. Remote wire (not supplied) Part list for installation (A) Faceplate Factory wiring harness (vehicle) Vehicle-specific Wiring Harness (separately purchased) For more information: Metra Electronics: www.metraonline.com Scosche Industries: www.scosche.com To the steering wheel remote control adapter Recommended connection Blue: To power antenna Blue/white: To amplifier Antenna terminal Light blue/yellow STEERING WHEEL REMOTE Join the same color wires together. Blue/white: Remote (200 mA max.) Orange/white: Illumination Brown: Tel muting Yellow: Battery 12 V Red: Ignition 12 V Black: Ground Gray: Front speaker (right) Gray/black White: Front speaker (left) White/black Purple: Rear speaker (right) Purple/black Green: Rear speaker (left)*2 Green/black *2 For KD-AR765S: To the optional SiriusXM Vehicle Tuner (commercially available) ( 11) (B) Trim plate Ignition switch (C) Mounting sleeve Car fuse block Separate red wire Make this connection if your vehicle factory wiring harness does not have "12 V ignition switch" wire. *2 You can also connect a subwoofer speaker directly using this lead without an external subwoofer amplifier. For setting, 15, 16. (D) Wiring harness (E) Extraction key ENGLISH 23