JVC KD-S25 Instructions - Page 21

ENGLISH Sound elements Range/selectable items BASS MID TRE Frequency 60 Hz 80 Hz 100 Hz 120 Hz 500 Hz 1.0 kHz 1.5 kHz 2.5 kHz 7.5 kHz 10.0 kHz 12.5 kHz 15.0 kHz Level (LVL) -06 to -06 to -06 to +06 +06 +06 Q Q0.5 Q0.75 Q0.75 Q1.0 Q1.0 Q1.25 Q1.5 Q1.25 Q2.0 Q1.5 BASS: Bass MID: Mid-range TRE: Treble 5 Repeat steps 3 and 4 to adjust other sound characteristics. The adjustment made will be stored automatically. Adjusting the sound You can adjust the sound characteristics to your preference. • The adjustment you make will be stored for the currently selected sound mode (iEQ) including "USER." 1 2 FADER *1 Adjust the front and rear speaker output balance. R06 to F06 BALANCE *2 Adjust the left and right speaker output balance. L06 to R06 LOUD*3 (loudness) Boost low and high frequencies to produce a well-balanced sound at a low volume level. LOUD ON or LOUD OFF SUB.W*4 (subwoofer) Adjust the subwoofer output level. 00 to 08, initial: 04 VOL ADJ (volume adjust) -05 to +05, Adjust the volume level of each source initial: 00 (except FM), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. • Before making an adjustment, select the source you want to adjust. VOLUME Adjust the volume. 00 to 50 or 00 to 30*5 *1 If you are using a two-speaker system, set the fader level to "00." *2 This adjustment will not affect the subwoofer output. *3 Loudness setting will be applied to all sound modes. *4 Displayed only when "L/O MODE" is set to "SUB.W" (see page 23). *5 Depending on the amplifier gain control setting. (See page 23 for details.) SETTINGS 21