JVC KD-S5050 Instructions - Page 19
Troubleshooting - cd player
UPC - 046838008238
View all JVC KD-S5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TROUBLESHOOTING ENGLISH What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • Sound cannot be heard from the speakers. The volume level is set to the Adjust it to the optimum level. minimum level. Connections are incorrect. Check the cords and connections. General • This unit does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. While holding SEL (Select), press (Standby/ On Attenuator) for more than 2 seconds to reset the unit. (The clock setting and preset stations stored in memory are erased) (See page 2) • SSM (Strong-station Sequential Memory) automatic preset does not work. Signals are too weak. Store stations manually. FM/AM • Static noise while listening The antenna is not connected Connect the antenna firmly. to the radio. firmly. • CD automatically ejects. CD is inserted upside down. Insert the CD correctly. • CD-R cannot be played back. • Tracks on the CD-R cannot be skipped. CD-R is not finalized. • Insert a finalized CD-R. • Finalize the CD-R with the component which you used for recording. • CD can be neither played CD is locked. back nor ejected. Unlocked the CD. (See page 11) CD Playback The CD player may have functioned incorrectly. While holding (Standby/On Attenuator), press / (Eject) for more than 2 seconds. Be careful not to drop the CD when it is ejected. • CD sound is sometimes interrupted. You are driving on rough roads. Stop playback while driving on rough roads. CD is scratched. Change the CD. Connections are incorrect. Check the cords and connections. • "NO DISC" appears on the No CD in the loading slot. display. CD is inserted incorrectly. Insert a CD into the loading slot. Insert the CD correctly. 19