JVC KD-S5050 Instructions - Page 8

ENGLISH Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Ex: Storing an FM station of 92.5 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 - 3, AM) you want to store FM stations into (in this example, FM1). • Each time you press the button, the FM band changes as follows: FM FM1 FM2 FM3 Notes: • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again. Tuning in to a preset station You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see "Storing stations in memory" on page 7 and 8. 1 Select the band (FM1 - 3, AM). AM AM 2 Tune in to a station of 92.5 MHz. FM FM1 FM2 FM3 Press ¢ to tune AM AM stations of higher frequencies. Press 4 to tune stations of lower frequencies. 3 Press and hold the number button (in this example, 1) for more than 2 seconds. 2 Select the number (1 - 6) for the preset station you want. 7 8 MO 9 10 11 RPT 12 RND "P1" flashes for a few seconds. 4 Repeat the above procedure to store other stations into other preset numbers. 8