JVC KD-X260BT Instruction Manual America - Page 20
Auto Pairing, BLUETOOTH - Mobile phone, Receive a call
View all JVC KD-X260BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
BLUETOOTH® • A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. (Page 21) • Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. • When the battery of the connected Bluetooth device runs low, "Device Name" "LOW BATTERY" appears. • Refer to the instruction manual of the Bluetooth device for more information. Auto Pairing (for KD-X360BTS) When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name. Automatic pairing request is activated only if: - Bluetooth function of the connected device is turned on. - [AUTO PAIRING] is set to [ON]. (Page 19) BLUETOOTH - Mobile phone Receive a call When there is an incoming call: • KD-X360BTS: The buttons will blink in the color you have selected in [RING COLOR]. (Page 18) KD-X260BT/KD-SX25BT: The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. (Page 18) • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. (Page 18) During a call: • KD-X360BTS: The buttons stop blinking and illuminate in the color you have selected in [RING COLOR]. (Page 18) KD-X260BT/KD-SX25BT: The buttons stop blinking. • If you turn off the unit or detach the faceplate, Bluetooth is disconnected. 16 ENGLISH