JVC KD-X33MBS Instruction Manual - Page 26
Crossover settings, Caution, Connection via speaker leads
View all JVC KD-X33MBS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
AUDIO SETTINGS (For KD-X33MBS) Setting on [SPK/PRE OUT] REAR/REAR (default) REAR/SUB.W SUB.W/SUB.W Audio signal through lineout terminal FRONT REAR SW Front speakers Rear speakers output output Subwoofer output ( Not available ) ( Not available ) ( Not available ) Front speakers L (left): Subwoofer output Subwoofer output output R (right): (Mute) Connection via speaker leads For connections without using an external amplifier. However, with this settings you can also enjoy the subwoofer output. ( 33) Setting on [SPK/PRE OUT] Audio signal through rear speaker lead L (left) R (right) REAR/REAR Rear speakers output Rear speakers output REAR/SUB.W Rear speakers output Rear speakers output SUB.W/SUB.W Subwoofer output (Mute) If [SUB.W/SUB.W] is selected: - [FRQ 120HZ] is selected in [SUB.W LPF] and [THROUGH] is not available. - [R02] is selected in [FADER] and selectable range is [R15] to [00]. Crossover settings Below are the available setting items for 2-way crossover and 3-way crossover. Caution Select a crossover type according to how the speakers are connected. ( 33) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low. SPK SIZE (speaker size) Selects according to the connected speaker size for optimum performance. • The frequency and slope settings are automatically set for the crossover of the selected speaker. • If [NONE] is selected for [TWEETER] of [FRONT], [REAR] and [SUBWOOFER] for [SPK SIZE], the [X ' OVER] setting of the selected speaker is not available. X ' OVER (crossover) [FRQ]/ [HPF FRQ]/ [LPF FRQ]: Adjusts the crossover frequency for the selected speakers (high pass filter or low pass filter). • If [THROUGH] is selected, all signals are sent to the selected speakers. [SLOPE]/ [HPF SLOPE]/ [LPF SLOPE]: Adjusts the crossover slope. • Selectable only if a setting other than [THROUGH] is selected for the crossover frequency. [PHASE]: Selects the phase of the speaker output to be in line with the other speaker output. [GAIN LEFT]/ [GAIN RIGHT]/ [GAIN]: Adjusts the output volume of the selected speaker. 22 JS_JVC_KD_X330BTS_X33MBS_K_EN_2.indd 22 13/10/2015 1:44:53 PM