JVC KD-X33MBS Instruction Manual - Page 36
How to remove the unit, When installing without the mounting sleeve, Installing the unit in-dash
View all JVC KD-X33MBS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
INSTALLATION / CONNECTION Installing the unit (in-dash mounting) Do the required wiring. ( 33) Part list for installation (A) Faceplate (B) Trim plate Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car Bend the appropriate tabs to hold the sleeve firmly in place. When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available). Use only the specified screws. Using wrong screws might damage the unit. How to remove the unit 32 (C) Mounting sleeve (D) Wiring harness (E) Extraction key Output terminals For 2-way crossover setting KD-X33MBS REAR FRONT SW : Rear output : Front output : Subwoofer output KD-X330BTS FRONT : Front output REAR/SW : Rear/subwoofer output For 3-way crossover setting KD-X33MBS REAR FRONT SW : Tweeter output : Mid Range output : Woofer output KD-X330BTS FRONT : Mid Range output REAR/SW : Woofer output JS_JVC_KD_X330BTS_X33MBS_K_EN_1.indd 32 29/9/2015 3:55:42 PM