JVC KD-X40 Instructions - Page 15

Menu operations Menu item SUB. W *5 (Subwoofer) SUB.W LPF *6 (Subwoofer lowpass filter) SUB.W LEVEL *6 (Subwoofer level) Selectable setting (Initial: [XX]) OFF: Cancels. [ON]: Turns on the subwoofer output. LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. 00 - 08[08]: Adjusts the subwoofer output level. AUDIO HPF *6 (High-pass filter) BEEP (Keytouch tone) TEL MUTING *7 (Telephone muting) ON: Activates the High Pass Filter. Low frequency signals are cut off from the front/rear speakers. [OFF]: Deactivates. (All signals are sent to the front/rear speakers.) [ON]/OFF: Activates or deactivates the keypress tone. ON: Mutes the sounds while using the cellular phone (not connected through KS-BTA100). [OFF]: Cancels. AMP GAIN *8 (Amplifier gain) LOW POWER: VOLUME 00 - VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) [HIGH POWER]: VOLUME 00 - VOLUME 50 TUNER SSM AREA (Frequency tuning interval) MONO (Monaural mode) IF BAND (Intermediate frequency band) RADIO TIMER IPOD SWITCH (iPod/iPhone control) AM *9 For settings, ' page 6. (Displayed only when the source is "FM".) [AREA US]: For North/Central/South America, AM/FM intervals: 10kHz/200kHz. AREA EU: For any other areas, AM/FM intervals: 9kHz/50kHz. AREA SA: For some South American countries, AM/FM intervals: 10kHz/50kHz. Displayed only when the source is "FM". [OFF]: Enables stereo FM reception. ON: Improves the FM reception but stereo effect will be lost. [AUTO]: Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) WIDE: Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. For settings, ' page 6. [HEAD MODE]/IPOD MODE/EXT MODE: For settings, ' page 8. (Displayed only when the source is "USB-IPOD".) [ON]/OFF: Enables or disables "AM" in source selection. SRC SELECT F-AUX *9 (Front auxiliary input) [ON]/OFF: Enables or disables "F-AUX" in source selection. R-AUX *9 (Rear auxiliary input) ON/OFF: Enables or disables "R-AUX" in source selection. [BT ADAPTER]: Select if the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100 (' page 10). The source name will be changed to "BT AUDIO". *5 Displayed only when is set to . *6 Displayed only when is set to . *7 This setting does not work if is selected for of . *8 The volume level automatically changes to "VOLUME 30" if you change to with the volume level set to higher than "VOLUME 30". *9 Displayed only when the unit is in any source other than the corresponding source "AM/ F-AUX/R-AUX/BT AUDIO". ENGLISH‫ |ޓ‬15