JVC KD-X40 Instructions - Page 6
Radio
View all JVC KD-X40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
RRaaddioio Searching for a station A B Select or . Auto search. (Press) Manual search. (Hold) "M" flashes, then press the button repeatedly. "ST" lights up when receiving an FM stereo broadcast with sufficient signal strength. Storing stations in memory Manual presetting You can preset up to 18 stations for FM and 6 stations for AM. While listening to a station... 1 (Hold) "PRESET MODE" flashes. 2 Select preset number. The preset number flashes and "MEMORY" appears. Auto presetting (FM only) SSM (Strong-station Sequential Memory) You can preset up to 18 stations for FM. 1 (Hold) Setting the Radio Timer You can tune in to a preset station at a specific time regardless of the current source. 1 (Hold) 2 [OFF] ONCE DAILY - - -// Cancels Radio Timer. Activates once. Activates daily. 3 Select the preset station. -/ - ... for FM/ ... for AM 4 Set the activation time. 2 - - - "SSM" flashes. When all the stations are stored, "SSM" stops flashing. To preset /, repeat steps 1 and 2. Selecting a preset station 5 Press MENU to exit. lights up after the Radio Timer has been set. Only one timer can be set. Setting a new timer will override the previous setting. The Radio Timer will not activate if the unit is turned off or if is set to after selecting an AM station for the timer. You can also select a preset station using / . 6 |ޓENGLISH