JVC KDS590 Instruction Manual - Page 16
Storing your own sound, adjustment, To reset to the factory settings
UPC - 046838105647
View all JVC KDS590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENGLISH Storing your own sound adjustment 5 To turn on/off the loudness function. See page 14 for details. You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustments in memory. • There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again. 1 Call up the sound mode you want to adjust. See page 15 for details. SCM 6 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display. Your adjustment made for the selected sound mode is stored in memory. SCM 2 7 Select "BAS" (bass) or "TRE" (treble). Repeat the same procedure to store other sound modes. 3 Adjust the bass or treble level. See page 14 for details. To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 15. 4 Repeat steps 2 and 3 to adjust the other items. 16