JVC KDS590 Instruction Manual - Page 21

Troubleshooting

Page 21 highlights

ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • CD cannot be played back. CD is inserted upside down. Insert the CD correctly. • CD sound is sometimes interrupted. You are driving on rough roads. Stop CD play while driving rough roads. CD is scratched. Change the CD. Connections are incorrect. Check the cords and connections. • "NO DISC" appears on the display. No CD is in the loading slot. Insert a CD into the loading slot. CD is inserted incorrectly. Insert it correctly. • Sound cannot be heard from The volume level is set to the the speakers. minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • SSM (Strong-station Signals are too weak. Sequential Memory) automatic preset does not work. Store stations manually. • Static noise while listening to The antenna is not connected the radio. firmly. Connect the antenna firmly. • CD can be neither played back The CD player may function nor ejected. incorrectly. Press and 0 at the same time for more than 2 seconds. Be careful not to drop CD when it is ejected. • The unit does not work at all. The built-in microcomputer may function incorrectly due to noise, etc. Press and SEL at the same time for more than 2 seconds to reset the unit. (The clock setting and preset stations stored in memory are erased.) (See page 2.) 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

21
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
CD cannot be played back.
CD sound is sometimes
interrupted.
“NO DISC” appears on the
display.
Sound cannot be heard from
the speakers.
SSM (Strong-station
Sequential Memory) automatic
preset does not work.
Static noise while listening to
the radio.
CD can be neither played back
nor ejected.
The unit does not work at all.
Remedies
Insert the CD correctly.
Stop CD play while driving
rough roads.
Change the CD.
Check the cords and
connections.
Insert a CD into the loading slot.
Insert it correctly.
Adjust it to the optimum level.
Check the cords and
connections.
Store stations manually.
Connect the antenna firmly.
Press
and
0
at the
same time for more than 2
seconds. Be careful not to drop
CD when it is ejected.
Press
and SEL at the
same time for more than 2
seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
(See page 2.)
Causes
CD is inserted upside down.
You are driving on rough roads.
CD is scratched.
Connections are incorrect.
No CD is in the loading slot.
CD is inserted incorrectly.
The volume level is set to the
minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
The CD player may function
incorrectly.
The built-in microcomputer
may function incorrectly due
to noise, etc.