JVC KT-SR2000 Instructions - Page 29

Alarm Clock You can set your JVC PnP to turn on at a specific time. The last selected stream prior to shutdown will be played when the Alarm turns on your JVC PnP. Program Alert You can program your JVC PnP to switch to a specified stream at a specified time. • To use your programmed setting, make sure to set "Program Alert" to "Program Alert On". Set Alarm: Press CH 5 / ∞ (or CH + / -) to select either "Alarm On" or "Alarm Off (default)", then press SEL (or SELECT). The following settings are possible on this sub-menu screen- • Program Time/Day (default-12:00pm/Monday) • Stream (default-Currently Playing Stream) • Program Alert On/Off (default-Off) Alarm Time (default-12:00pm): Press CAT 3 / 2 (or CAT + / -) to set the hour, press CH 5 / ∞ (or CH + / -) to set the minute, then press SEL (or SELECT). AM or PM will switch automatically as you advance the time. Note: If your JVC PnP cannot receive the SIRIUS signals (satellite and terrestrial) correctly when the alarm time comes, you may hear a series of alarm tones. Program Time/Day: Press CH 5 / ∞ (or CH + / -) to select either "Time" or "Day", then press SEL (or SELECT). • Time: To set the time. Press CAT 3 / 2 (or CAT + / -) to set the hour, then press CH 5 / ∞ (or CH + / -) to set the minute, then press SEL (or SELECT). AM or PM will switch automatically as you advance the time. • Day: To set the day. Press CH 5 / ∞ (or CH + / -) to select the day- Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday, then press SEL (or SELECT). Make sure to set both "Time" and "Day" correctly. 29