JVC KT-SR2000 Instructions - Page 8
Installation in Your Car with KS-K6012 continued, Finding the Best Antenna Mounting, Location
UPC - 046838016394
View all JVC KT-SR2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation in Your Car with KS-K6012 (continued) 3 Plug the cigarette lighter adapter into the back Finding the Best Antenna Mounting of the cradle-DC 12 V. Location 4 Activate the FM signal transmitter and preset the frequency (see "4 FM Transmitter Options" on page 24). 1 Temporarily plug the antenna into the back of the cradle-ANT. until it is firmly seated. • It is recommended to preset the same frequency into your car stereo as you have selected so you can easily tune in to the frequency. 2 Find an antenna location on a metal surface of your car-at least 30 cm × 30 cm (12 inches × 12 inches), and at least 15 cm (6 inches) from a window. Note: You can also connect a cassette adapter or an audio cord (both not supplied) to the AUDIO jack to send the signals to your car stereo. • The antenna's powerful magnet will secure it to the metal surface. • Best reception is achieved with the antenna mounted on the roof or trunk for convertibles. • If your car has a roof rack or skid ribs, it may be necessary to mount the antenna off-center. An optional hard-wired FM transmitter-FM Switching Box Assembly (Parts No. 112C3159) is available. By connecting this Assembly between 3 Temporarily plug the cigarette lighter adapter into the cigarette lighter. the FM OUT terminal of the cradle and the antenna input terminal of your car stereo, you can obtain stable and reliable transmission/reception. 4 Slide JVC PnP all the way into the cradle so that the connector at the bottom of the unit makes proper contact in the cradle. 8